Category Local Services

The Benefits of Power Factor Correction

The Power Factor cost reduction will reduce your demand charges on your electricity bills. At the same time, it will increase the load carrying capacity that you have in your existing electrical circuits. There are numerous benefits that you can derive from the power factor cost reduction beyond just its effect on your balance sheets. For example, increasing your Brisbane energy efficiency will also result in great environmental benefits. It is one of the best ways to cut down on your carbon footprints. Businesses that want to have some green footprints can easily apply power factor correction as a way of cutting down on the environmental impact of their activities.

power factor cost reduction

power factor cost reduction

The most obvious benefit of applying the power factor cost reduction is to increase the demand charges on your electricity. It all boils down to how the utility companies price their electricity. This is often based on the maximum metered demand that is read from the highest metered demand in kilowatts or in kilovolt-amperes.

For those big businesses or large power consumers that consume more than $2000 worth of electricity per month, the demand charges are generally based on the kilovolt-amperes or kVA. With a kVA-based demand, having a low power factor will result in higher kVA demand and this will subsequently result in much higher demand charges. By improving the power factor in these situations through the Power Factor reduction, you will, therefore, be able to lower your kVA demand charges and your business will be able to reduce its demand charges. This is one of the best ways to reduce electricity costs for your energy-guzzling business.

Increase the load carrying capacity of the existing circuits

This is the other benefit that you will derive from lowering your Power Factor through the Power Factor Correction method. Lower Power Factor means that you have significant load that is drawing reactive power. However, these loads drawing the reactive power are still supplied by reactive current. When you install the capacitors to correct the Power Factor, you will be able to reduce the current that is being drawn from the network. The reduction in the current drawn will also result in the reduction of the Power Factor of the network. This will as a result allow the circuit to carry greater loads than was possible without the corrective measure. By expanding the load capacity of your network, you are going to save thousands of dollars that could have been used in upgrading your distribution network through more cabling and transformer installation.

Of course the other key benefit that you will derive from the power factor cost reduction is that you are also able to cut down on your carbon footprints in the process. By applying the power factor correction on your network, you will also be putting less strain on the electrical grid and will as a result reduce your carbon footprint. Over time, this will be worth thousands of tons in carbon footprint reduction. It is something that you could not have achieved through any other energy saving techniques without significant costs on your business. Visit http://www.ecopoweredsolutions.com.au/peak-demand-reduction.html

Read More

REVIVE YOUR ITEMS WITH THE BEST UPHOLSTERY CLEANING

One of the most welcoming things whenever you get home is the nice scene after good cleaning. However this is not always the case. You could be deep into business that you do not find much time to regularly clean your house. Maybe you have children in the house who are a bit messy. Such reasons make it difficult for you to keep the house clean all the time. The good news is you can now find upholstery cleaning Sydney offers.

When it comes to cleaning services, there are different packages that you can make use of at different times. It is important to know which service suits what part of the house so that you can have a lasting, nice experience after the service. Depending on the material you want to clean, whether leather, wool, cotton, concrete, there is a service for you.

Upholstery cleaning and protection

This is one of the Sydney upholstery cleaning services that deal with material such as wool, cotton, mock suede, silk, viscose, nylon, Indian cotton among others. Sometimes knowing the exact material your item is made of is not easy, the experts will come, assess the item and tell you the material it is made of. Part of this includes you getting advice on the best cleaning service for that material.

A number of cleaning methods are used that will not just leave your item clean but give it a revived look. For instance hot water extraction that is also known as steam cleaning can be applied followed by a turbo speed drying. The fabric can further be rendered stain resistant by applying water or solvent based fabric protector.

Leather Upholstery cleaning and protection

Leather furniture are always very expensive and at times delicate. This simply tells you that you need to make sure that give them top quality upholstery cleaning in Sydney. These cleaning methods should also be environmentally friendly.

First the dirt is removed using a hand cleaning method that is gentle. For protection these items are conditioned so that they can stay longer without attracting stains. The longer the items stay without stain, the better for your pocket.

Mattress Cleaning and Sanitation

Your mattress will first go through inspection then cleaned using a range of stain removal solvent. The mattress is then quick dried using air remover in case you need to use the mattress the same day. It is also kept stain resistant.

Other cleaning services available include carpet cleaning and protection, rag cleaning and protection, tile cleaning and sealing, pet odour removal, dust removal among other services for upholstery cleaning Sydney offers.

The bottom line is there is a cleaning service for whatever cleaning need you have. However for the best Upholstery cleaning Sydney has, there is only one place to reach to. Chemclean Quickdry ensures that your items are not just clean but stay dirt resistant for the longest time. With the right experience of the cleaning technicians, you are in for freshness like no other. Visit the office or reach out through the website to step up your hygiene standards. Visit them online athttp://chemdryquickdry.com.au/upholstery-cleaning-protection/

Read More

Revive Your Items with the Best Upholstery Cleaning

One of the most welcoming things whenever you get home is the nice scene after good cleaning. However this is not always the case. You could be deep into business that you do not find much time to regularly clean your house. Maybe you have children in the house who are a bit messy. Such reasons make it difficult for you to keep the house clean all the time. The good news is you can now find upholstery cleaning Sydney offers.

When it comes to cleaning services, there are different packages that you can make use of at different times. It is important to know which service suits what part of the house so that you can have a lasting, nice experience after the service. Depending on the material you want to clean, whether leather, wool, cotton, concrete, there is a service for you.

Upholstery cleaning and protection

This is one of the Sydney upholstery cleaning services that deal with material such as wool, cotton, mock suede, silk, viscose, nylon, Indian cotton among others. Sometimes knowing the exact material your item is made of is not easy, the experts will come, assess the item and tell you the material it is made of. Part of this includes you getting advice on the best cleaning service for that material.

A number of cleaning methods are used that will not just leave your item clean but give it a revived look. For instance hot water extraction that is also known as steam cleaning can be applied followed by a turbo speed drying. The fabric can further be rendered stain resistant by applying water or solvent based fabric protector.

Leather Upholstery cleaning and protection

Leather furniture are always very expensive and at times delicate. This simply tells you that you need to make sure that give them top quality upholstery cleaning in Sydney. These cleaning methods should also be environmentally friendly.

First the dirt is removed using a hand cleaning method that is gentle. For protection these items are conditioned so that they can stay longer without attracting stains. The longer the items stay without stain, the better for your pocket.

Mattress Cleaning and Sanitation

Your mattress will first go through inspection then cleaned using a range of stain removal solvent. The mattress is then quick dried using air remover in case you need to use the mattress the same day. It is also kept stain resistant.

Other cleaning services available include carpet cleaning and protection, rag cleaning and protection, tile cleaning and sealing, pet odour removal, dust removal among other services for upholstery cleaning Sydney offers.

The bottom line is there is a cleaning service for whatever cleaning need you have. However for the best Upholstery cleaning Sydney has, there is only one place to reach to. Chemclean Quickdry ensures that your items are not just clean but stay dirt resistant for the longest time. With the right experience of the cleaning technicians, you are in for freshness like no other. Visit the office or reach out through the website to step up your hygiene standards. Visit them online at http://chemdryquickdry.com.au/upholstery-cleaning-protection/.

Read More

Stay Ahead With Self-inking Stamps

If you are planning to buy self inking rubber stamp for your office, you are well on the right track to saving time and money. While traditional rubber stamps are still used in many offices, self-inking stamps are gaining favor as they offer more advantages than their traditional stamps. Read an article here at https://en.wikipedia.org/wiki/Rubber_stamp.

sta

Here are some of the advantages why you should buy self inking rubber stamp as opposed to the traditional version.

Saves time: If you want to do bulk stamping on mail, forms, or any other type of paperwork, a self-inking stamp can perform the job faster than a traditional stamp. With a traditional stamp, you have to use both the inkpad and the stamp at the same time, which takes time.

A self-inking stamp has a built-in inkpad, which means you just do the stamping straight on the paperwork. If you were to take one hour using a traditional stamp, you are likely to take half the time with a self-inking stamp.

Adds charm: One reason to buy self inking rubber stamp is to have it personalized to your taste. It can have your logo, initials, or a piece of artwork engraved in the stamp to add an element of visual appeal to the stamp. Traditional stamps are always plain and contain just the name and address of the person or company.

If you want your paperwork, mail, or forms to look more personalized, then you need to buy self inking rubber stamps. With additional features on your address, it becomes more professional, practical, and personalized.

No need to re-ink: With the built-in inkpad, you can stamp as many letters as you want using a self-inking stamp. From reliable suppliers, you can order self inking stamps for your home office or business. Besides, the inkpad minimizes the mess that is associated with ink in traditional rubber stamps. This leads to quality images and lettering in your documents, which may boost your relationship with the recipient.

They are easy to carry around: Self inking rubber stamps are light in weight and easy to carry around; you can simply slip it into your laptop bag. For example, if you work outside your office quite often, it is advisable to have your stamp around for possible stamping while out in the field.

With a self inking stamp, you just need to carry the stamp box without the need for a separate inkpad. This could be a different situation if you were to use a traditional rubber stamp that must have a separate inkpad to operate. They provide a fitting opportunity for passing confidential information without having to stay in the office.

They are available in a variety of sizes and designs: Once you identify a reliable supplier, you can order self inking rubber stamp in any size or design. This enables you to choose a size that can work best for you. For example, if you want to include additional features in your stamp, you can have your stamp slightly bigger in size.

In addition to your postal or physical address, your stamp may include among others a professional title, business logo, or a piece of artwork that identifies with you or your business. For additional information about self inking stamps in Australia, visit http://www.stamps.net.au/categories/Self-Inking-Rubber-Stamps/

Read More

Understanding Peak Demand Cost Reduction in Brisbane

The smart businesses that are energy and cost-conscious only use what they need and pay for what they use. If you are not doing that then you are wasting away very good money that you could have put to other uses. The peak demand power charges are expected to increase significantly as the utility company will charge companies for the “apparent power”. This means that you will be paying not for the power that you use but the one that is supplied to you or the one that you draw from the distribution network. For those with an eye for efficiency, this is a situation that is unacceptable hence the mad rush amongst most companies to invest in peak demand cost reduction.

With peak demand cost reduction, you will be able to maintain your Power Factor at an acceptable and optimal level that is close to one through a process called Power Factor Correction. Through the Power Factor correction solutions, you will be able to optimally compensate on the reactive power that is supplied to your circuit so that you can draw only the current that you need and increase your loads without a significant increase in the costs. This will dramatically the productivity and energy efficiency of your site without spending tens of thousands of dollars on upgrades for energy efficiency.

Why is the Peak Demand Reduction Important?

The most important benefit of the peak demand reduction is in its ability to help you cut your peak demand charges on your electricity bills by as much as 25%. For those companies that are using at least 160MW per year or paying bills of over $2000 per month, a new punitive pricing regime is about to begin in 2015. These companies’ power usage will be priced in kVA rather than kW. This means that these companies will be paying not just for the power used but also for the apparent power. It is an extra bill that you do not have to bear if you invest power factor correction Gold Coast services.

The electricity retailer will be charging you for the power supplied in kVA rather than the power used in KW so the onus is on you to invest in professional Power Factor Correction in order to reduce this electricity burden for your business. By investing in professional Power Factor correction services for peak demand cost reduction, you will be putting your power consumption back in your hands and saving your business thousands of dollars in utility costs which could have gone to waste. For further details, check out http://en.wikipedia.org/wiki/Peak_demand.

How the Process Works

In order to understand the importance of peak demand cost reduction, it is necessary to understand how Power Factor works in the first place. The Power Factor is a measure of how efficiently the electrical devices that you have are using power. This is typically a measure of between 0 and 1. A Power Factor of 1 is ideal. It is often displayed in the electrical bill but where it is not displayed, the value can be calculated for you by a company that specializes in peak demand cost reduction. It generally varies from month to month based on your unique usage patterns for your electrical power.

Most people with uncorrected peak demand generally have it hovering between 0.7 and 0.9. It is best to bring it as close to 1 as possible so that you do not pay for more than you are using. The low power factor is typically improved by installing a Power Factor Correction Capacitor which will act as the “silent generators” of reactive power so that your motors do not have to draw it from the utilities.

Read More